24-Bit/192kHz 8-Channel Full Range Preamp & AD converter

Micstasy is an 8-Channel hi-end mic/line preamp combiningtypical RMEfeatures with a number of previously unseen features. It can be usedanalog (Mic/Line In to Line Out) and digital (Mic/Line In to DigitalOut), with both signal paths operating simultaneously. Just passing onthe amplified signals replaces the need for a splitter box on stage.The device is fully remote-controllable via MIDI or MIDI over MADI. TheMicstasy's innovative concept allows for amplification and digitizationof ALL analog signal sources. Be it high-level stage signals, typicalstudio signals, lower level and high-impedance instruments, or dynamic,condenser or ribbon microphones: Micstasy understands them all - in away that is simply thrilling.

Features

• 8 x Analog Input Preamps (XLR/Line with 85 dB Gain Range)
• 8 x Analog Output (XLR) I/O oder 2 x SPDIF I/O (optical andcoaxial)
• 2 x ADAT Out (8 channels bei 96 kHz)
• 1 x MIDI I/O
• optional: Madi-I/O (I64 MADI-Card)

32- and 16-Channel High-End Analog to MADI/ADAT converters

M-32 AD and M-16 AD are 32-/16-channel high-end ADconverters, easy to operate yet having a comprehensive feature set. Theunits combine excellent analog circuit design with the latest converterchips and RME's superior SteadyClock, resulting in a state-of-the-artAD conversion! The unit's unique set of features includes analoglimiters, three hardware reference levels up to +24 dBu, MADI and ADATI/O up to 192 kHz, 6.3 mm TRS and D-sub inputs, remote control viaMIDI, and operation across a wide range of mains voltages, all packedinto a 2U enclosure. An extraordinary limiter, conceived and optimisedfor professional studio, stage, and broadcast applications, offersessential operational safety with its capability to limit an input'soverload of up to 17 dB without audible distortion (max. input level +30 dBu).

Features

• M-32 AD: 32 x Analog Out
• M-16 AD: 16 x Analog Out
• 1 x MADI I/O (optical and coaxial)
• 4 x ADAT Out (TOSLINK)
• 1 x ADAT In (sync only)
• MIDI I/O (5-pin DIN)
• Word Clock I/O (BNC)

32- and 16-Channel High-End MADI/ADAT to Analog converters

M-32 DA and M-16 DA are 32-/16-channel high-end DAconverters, easy to operate yet having a comprehensive feature set. Theunits combine excellent analog circuit design with the latest converterchips and RME's superior SteadyClock, resulting in a state-of-the-artDA conversion! The M-series converters have been conceived andoptimised for professional studio, stage, and broadcast applications.Combinations of the M-16 DA and M-32 DA converters allow for setupswith 16, 32, 48, or 64 channels, according to your individualapplication or budget. The unit's unique set of features includes threehardware reference levels up to +24 dBu, MADI I/O and ADAT input up to192 kHz, 6.3mm TRS and D-sub outputs, remote control via MIDI, andoperation across a wide range of mains voltages, all packed into a 2Uenclosure.

Ausstattung

• M-32 DA: 32 x Analog Out
• M-16 DA: 16 x Analog Out
• 1 x MADI I/O (optical and coaxial)
• 4 x ADAT In (TOSLINK)
• MIDI I/O (5-pin DIN)
• Word Clock I/O (BNC)

192 kHz 8-Channel High-End AD/DA converter

The ADI-8 QS is a highly flexible and fully featured8-Channel AD/DA converter. The device combines excellent analog circuitdesign with outstanding low latency AD/DA converter chips. Along withSteadyClock, the QS surely redefines the reference class ofanalog/digital converters. The compact 19"/ 1U device has a host ofextraordinary features, including analog and digital limiters, 4hardware reference levels up to +24 dBu, AES/EBU and ADAT I/O up to 192kHz, optional MADI I/O, remote control via MIDI, remote digital inputtrimming for full input calibration, remote volume control for all 8analog outputs, either separately, globally, ganged and much more.

The analog inputs and outputs feature the same circuitry asRMEs well-known ADI-8 series, ensuring excellent signal to noise ratioand low THD. On the digital side, SteadyClock, RME's unique clocktechnology and jitter suppression, further enhances the list offeatures, ensuring the best sound quality regardless of the quality ofthe reference clock signal. The QS uses the latest AD- and DA-convertercircuits with up to 192 kHz, with S/N ratios of 120 dBA. New digitalfilters reduce the conversion delay from over 40 samples to just 8samples. Low latency in perfection!

The ADI-8 QS also offers an unsurpassed choice of interfaceoptions. Inaddition to 2 ADAT I/Os that support up to 192 kHz (S/MUX), the devicealso features a 25-pin AES/EBU interface for all inputs and outputs.And that's not all - The ADI-8 QS features RMEs latest technologicalachievement - an expansion slot that makes the device even moreflexible. The slot can host a MADI option card for direct connection toMADI systems. All interface options can be used simultaneously underall conditions; analog (balanced TRS and/or D-sub), ADAT, AES/EBU andthe MADI option card.

Features

• 8 x Analog I/O
• 2 x ADAT I/O (up to 192 kHz) or 2 x SPDIF I/O (optical andcoaxial)
• 4 x AES/EBU I/O (up to 192 kHz)
• 1 x MIDI I/O
• Remote control (Volume, DIM, Presets)
• Word Clock I/O
• optional: MADI I/O Module

High-Precision 8-Channel 96 kHz ADAT/TDIF AD/DA converter

The ADI-8 DS is an 8 channel AD/DA converter with referenceapproach.The compact 19" 1U rackmount enclosure includes several outstandingfeatures, like Intelligent Clock Control (ICC), SyncCheck®,SyncAlign®, TDIF/ADAT converter and Bit Splitter. AD- andDA-circuit automatically operate either independently or linked. Thelatest 24-Bit converters with 128 times oversampling achieve 117 dBAtrue dynamic range. All digital inputs and outputs operate at full24-bit resolution.

Features include 88.2 and 96 kHz sample rate and Dither. DSstands for Double Speed, meaning double sample rate. As ADAT opticaldoes not support sample rates higher than 48 kHz the DS mode requirestwo channels to transmit the data of one channel. The used methodcalled Sample Split is compatible to S/MUX, and also found in theHammerfall and Hammerfall Light. The combination Hammerfall/ADI-8 DSallows DVD-compatible Hi-End recordings (up to 8 channel @ 96 kHz), atan astonishing low price.

Features

• 8 x Analog I/O
• 1 x ADAT I/O
• 1 x TDIF-I/O
• 1 x Word Clock I/O
• Samplerate: up to 96 kHz

High-Performance 192 kHz 2-Channel AD/DA converter

The ADI-2 is a both compact and extremely flexible 2-ChannelHi-End AD/DA-converter. The small 9.5" unit offers top notchAD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Itsability to use SPDIF, AES and ADAT format provides outstandingcompatibility. Whatever it is - simply get connected! Key features ofthis extraordinary flexible converter are balanced inputs and outputs,monitoring via headphone out, SteadyClock for optimal converterquality, 3-stage hardware input and output level control, and itscapability to run on a wide range of power supplied.

Features

• 1 x Analog I/O
• 1 x ADAT or SPDIF I/O (optical and coaxial, AES/EBUcompatible)

192 kHz 8-Channel AES/ADAT/TDIF Format and SamplerateConverter (Triple Universal Format)

The ADI-192 DD is the successor to the highly successfulADI-8 DD. The completely re-engineered device was designed to be themost powerful format and sample rate converter ever. Hence the ADI-192DD not only features considerable improvements compared to the ADI-8DD, but also adds a number of new and unique features.

The unit consists of three 8-Channel format converters with24-Bitaudio resolution. The three output formats ADAT, TDIF and AESindependently access the three input formats ADAT, TDIF and AES. Thanksto free selection of inputs, signals can be copied and distributedbetween all connected devices - without the need to change any cables.Four XLR AES/EBU inputs and outputs each, and two ADAT and TDIF inputsand outputs allow full 8-Channel operation even at 96 kHz / 24-Bit. At192 kHz, there are eight AES channels and four ADAT and TDIF channels.Switchable 24/192kHz sample rate converters allow 8-Channel sample rateconversion and clock decoupling of the highest quality.

Features

• 4 x AES/EBU I/O
• 2 x ADAT I/O (optical)
• 2 x TDIF I/O (D-sub)
• 2 x SPDIF I/O (optical)
• 1 x Word Clock I/O