[Storefront]

[A2D Solutions]




Mogami MIDI Synchro Cable Assemblies

MIDI SYNCHRO CABLE ASSEMBLIES
MOGAMI MIDI SYNCHRO CABLE ASSEMBLIES are specially designed for use with the Musical Instrument Digital Interface (MIDI) communication system. Applications include the latest MIDI patchbays, and interconnection between MIDI equipment and MIDI served musical instruments. These outstanding professional cables offer the following features:
  • SINGLE and DUAL MIDI CABLES are both available from standard stock. NEW DUAL MIDI CABLES are designed for compact wiring and prevent connection errors when using both Midi-Out and Midi-In ports simultaneously.
  • One piece molded 5pin Din connectors.
  • Low profile two stage molding for easy handling, reliability and long life.
  • 0.76µ gold plated pin version available to order.
  • Specially designed, superflexible cable with four #25AWG copper conductors and served (spiral) shield.
  • Attractive, durable, satin black rubber like PVC jacket.
  • Fast, accurate transmission of MIDI signal via a twisted pair for better electromagnetic noise rejection.
  • Additional two pins wired for tape synchro signal.
  • Interchangeable colour rings for easy patch cord identification.
  • Bulk cable also available in 50m (164Ft), 100m (328Ft) rolls and 200m (656Ft) spools.

Single Cable Part No. W2948
Dual Cable Part No. W3033



Part No. Single MIDI-015 MIDI-03 MIDI-05 MIDI-10 MIDI-15 MIDI-20 MIDI-30
Dual MIDI-015D MIDI-03D MIDI-05D MIDI-10D MIDI-15D MIDI-20D MIDI-30D
Length 18"(1.5')
45cm		 3Ft
90cm		 5Ft
1.5m		 10Ft
3m		 15Ft
4.5m		 20Ft
6.1m		 30Ft
9.1m
MIDI Synchro Cable Assemblies midi4d

SPECIFICATIONS
Configuration MIDI Synchro Cable Assembliesdiagram midi2d MIDI Synchro Cable Assemblies diagram midi3d
Cable Part No. W2948 W3033
Conductor 30/0.08A (30×#40) 0.15mm² (#26AWG)
Insulation 1.2Ø (0.047"Ø) PVC (BLACK/WHITE/RED/GREEN)
Shield 98/0.12A (98×#37) Served Shield
Jacket 5.0Ø (0.197"Ø) Flexible PVC (BLACK)
Weight 8.6kg/200m 15kg/200m
PLUG
Pins 0.76µ gold or silver plated brass
Shield Nickel Plated Brass
Insulation Polyacetal Resin
Molding Flexible PVC (Two Stage Molding) (BLACK)

ELECTRICAL & MECHANICAL CHARACTERISTICS
DC Resistance (20°C) Inner Cond.: 0.12W/m(0.037W/Ft)
Shield: 0.02W/m(0.006W/Ft)
Capacitance (1kHz, 20°C) Between Twisted Pair: 99 pF/m (30 pF/Ft)
Between Shield and one of Twisted Pair: 182 pF/m (56 pF/Ft)
Between Shield and Synchro Conductor: 180 pF/m (55 pF/Ft)
Between One of Twisted Pair and Synchro Conductor: 91 pF/m (28 pF/Ft)
Pitch of Twisted Pair Approx. 30mm (1.18")
Electromagnetic Noise* 0.02‾0.06mV
Voltage Breakdown Must withstand at DC 500V/15sec.
Insulation Resistance
(DC 125V, 20°C)		 10000 MW × m Min.
Tensile Strength
(At Cable-Connector Joint)		 480 N Min.
Flex Life*
   : At the connector strain relief
   : Cable itself
(200gr, Bend radius of the
cable stopper : 12.7mm)
45,000 Cycles

6,700 Cycles
Emigration Non-emigrant to ABS resin
* Using standard testing method of Mogami Wire & Cable Corp.

WIRING DIAGRAM:
The MIDI signal is transmitted via a twisted pair (black and white) and wired to pins 4 & 5. MIDI Synchro Cable Assemblies diagram midi5d
MIDI Synchro Cable Assemblies midi6d
NOTE: Transmission lag in MIDI systems is mainly caused by the speed of the photocoupler and the rise time of the driver rather than the transmission characteristics of the cable.