Mogami 110W AES/EBU digital audio cables
W3159
W3173
W3080
W3080-FC
FERRITE CORE
 |
W3080-TB
FITTING TUBING FOR ITT CANNON XLR CONNECTOR
 |
All of MOGAMI 110W
AES/EBU digital audio cables are designed with flexibility and handy
configuration. Many variations are available from regular application
type up to long distance application types, from single core up to
12-core types, internal wiring type, and interconnect application
types. Strict tolerance control of impedance within ±5% up to
±10% at the maximum.
| Part No. |
W3159 |
W3228 |
W3080 |
W3135 |
W3173 |
W3160
‾ W3163 |
Suggested
Maximum
applicable length |
150m
492Ft |
300m
1000Ft |
150m
492Ft |
Part No. W3159 is for
internal wiring material, Part No.3160 ‾ 3163 are
multicore cables and other cables are for regular interconnect
application. Part No. W3228 is compact size, flexible and durable
cofiguration to meet tiny telephone plug cable clamp, therefore it is
recommended for use with rough applications. And, Part No. W3173 is
specially designed for long distance application assured over 300m.
However, above suggested
maximum applicable length is based on use with any device that meets
AES standard requirement without equalizer. In the case of use with an
equalizer, the maximum applicable length can be expanded up to 1.5
times longer than assured length above. We have also prepared CAD
program to see the changes of eye-diagram and transmitted wave form at
the receiving end for various working conditions, so you can check it
yourself at http://www.mogami-wire.co.jp/
before purchasing cables. Since AES/EBU digital audio cable is low
capacitance characteristics, it can result in high quality analog audio
transmission in general especially for high frequency range.
Bantam Patch Cord
| Part No. |
PJD-12 |
PJD-18 |
PJD-24 |
PJD-36 |
PJD-48 |
PJD-60 |
PJD-72 |
| Length |
12"
30cm |
18"
45cm |
24"
60cm |
36"
90cm |
48"
120cm |
60"
150cm |
72"
180cm |
Cable: Part No. W3228;
Standard Color: Black only
SPECIFICATIONS
| Configuration |
 |
 |
 |
|
 |
| Part No. |
W3159 |
W3228 |
W3080 |
W3135 |
W3173 |
| No. of Conductor |
2 |
2 |
2 |
2 |
2 |
| Conductor |
Details |
7/0.20A (7×#32AWG) |
36/0.08OFC (36×#40AWG) |
7/0.18A (7×#33AWG) |
7/0.18A (7×#33AWG) |
19/0.25A (19×#31AWG) |
| Size |
0.22mm² (#24AWG) |
0.18mm² (#25AWG) |
0.178mm² (#25AWG) |
0.178mm² (#25AWG) |
0.932mm²
(#18AWG) |
| Insulation |
Ov. Dia.
(mm) |
1.35Ø (0.053") |
1.35Ø (0.053") |
1.36Ø (0.054") |
1.36Ø (0.054") |
2.8Ø (0.110") |
| Material |
CPP |
XLPE |
XLPE |
XLPE |
CPP |
| Colors |
Red/Light green |
Red/Clear |
Red/Clear |
Red/Clear |
Red/White |
Mono-
filament Filler |
Ov. Dia.
(mm) |
- |
- |
- |
1.87Ø (0.0736") |
| Material |
Cotton |
LDPE (Clear) |
| Drain Wire |
Details |
7/0.20A (7×#32AWG) |
- |
7/0.18A (7×#33AWG) |
7/0.18A (7×#33AWG) |
20/0.18TA (20×#33AWG) |
| Size |
0.22mm² (#24AWG) |
- |
0.178mm² (#25AWG) |
0.178mm² (#25AWG) |
0.509mm²
(#21AWG) |
| Served Shield |
Approx. 79/0.10A
(Approx. 79/#39AWG) |
Approx. 98/0.10A
(Approx. 98/#39AWG) |
Approx. 60/0.12A
(Approx. 60/#37AWG) |
Approx. 60/0.12A
(Approx. 60/#37AWG) |
Approx.
100/0.18A
(Approx.
100/#33AWG) |
| Ov. Jacket |
Ov. Dia.
(mm) |
3.2Ø (0.126"Ø) |
4.8Ø (0.189"Ø) |
5.0±0.3Ø
(0.197±
0.0118"Ø) |
5.0±0.3Ø
(0.197±
0.0118"Ø) |
7.8±0.5Ø
(0.307±
0.0197"Ø) |
| Material |
PVC |
PVC |
Flexible PVC |
Flexible PVC |
PVC |
| Color |
Black/Gray |
Black |
Black / Blue |
Black |
Black |
| Roll Sizes |
50m (164 Ft) /
100m (328Ft) / 200m (656Ft) |
77m (250 Ft) / 305m (1,000Ft) |
300m (983Ft) |
| Weight |
2kg/100m Roll |
3kg/100m Roll |
3.3kg/100m Roll |
2.6kg/250m Roll |
27kg/300m |
ELECTRICAL & MECHANICAL CHARACTERISTICS
| Part No. |
W3159 |
W3228 |
W3080 |
| DC Resistance at 20°C |
Inner
Cond. |
0.081W/m(0.0247W/Ft) |
0.1W/m(0.031W/Ft) |
0.11W/m(0.034W/Ft) |
| Shield
Cond. |
0.024W/m(0.0073W/Ft) |
0.025W/m(0.0076W/Ft) |
0.028W/m(0.0085W/Ft) |
Capacitance at 1kHz, 20°C
(effective capacitance value
between inner twin) |
46pF/m
(14pF/Ft) |
53pF/m
(16pF/Ft) |
46pF/m
(14pF/Ft) |
| Inductance |
0.8µH/m
(0.24µH/Ft) |
0.8µH/m
(0.24µH/Ft) |
1.0µH/m
(0.31µH/Ft) |
| Characteristic Imperdance |
110W±10% |
110W±5% |
110W±5% |
| Attenuation (6MHz) |
0.065dB/m
(0.020db/Ft) |
0.069dB/m
(0.021db/Ft) |
0.069dB/m
(0.021db/Ft) |
| Phase Constant (6MHz) |
0.17rad/m |
0.20rad/m |
0.20rad/m |
| Electrostatic Noise* |
50mV Max. |
| Electromagnetic Noise at 10kHz* |
2.0mV Max. |
| Microphonics** |
60mV |
40mV Max. |
40mV Max. |
| Voltage Breakdown |
Must withstand
at DC 500V/15sec, 20°C |
| Insulation Resistance |
10000 MW ×
m Min. at DC 250V, 20°C |
| Flex Life* |
2,900 cycles |
33,000 cycles |
10,000 cycles |
| Tensile Strength |
303N |
441N |
343N |
| Emigration |
Non-Emigrant to
ABS resin |
| Applicable Temperature |
-20°C‾
+60°C(-4°F‾ +140°F) |
| Standard |
AES3-100X
(ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647 |
AES3-100X
(ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
UL AWM 2623, 30V, 80°C, VW-1 |
AES3-100X
(ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647 |
ELECTRICAL & MECHANICAL CHARACTERISTICS
| Part No. |
W3135 |
W3173 |
| DC Resistance at 20°C |
Inner
Cond. |
0.11W/m(0.034W/Ft) |
0.02W/m(0.006W/Ft) |
| Shield
Cond. |
0.028W/m(0.0085W/Ft) |
0.007W/m(0.0021W/Ft) |
Capacitance at 1kHz, 20°C
(effective capacitance value
between inner twin) |
46pF/m
(14pF/Ft) |
50pF/m
(15.3pF/Ft) |
| Inductance |
1.0µH/m
(0.31µH/Ft) |
0.7µH/m
(0.21µH/Ft) |
| Characteristic Imperdance |
110W±5% |
110W±10% |
| Attenuation (6MHz) |
0.069dB/m
(0.021db/Ft) |
0.0347dB/m
(0.0106db/Ft) |
| Phase Constant (6MHz) |
0.20rad/m |
0.17rad/m |
| Electrostatic Noise* |
50mV Max. |
| Electromagnetic Noise at 10kHz* |
2.0mV Max. |
| Microphonics** |
40mV Max. |
| Voltage Breakdown |
Must withstand
at DC 500V/15sec, 20°C |
| Insulation Resistance |
10000 MW ×
m Min. at DC 250V, 20°C |
| Flex Life* |
10,000 cycles |
16,000 cycles |
| Tensile Strength |
362N |
Over 980N |
| Emigration |
Non-Emigrant to
ABS resin |
| Applicable Temperature |
-20°C‾
+60°C(-4°F‾ +140°F) |
| Standard |
AES3-100X
(ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
UL444, CM, 300V, 60°C, #25AWG |
AES3-100X
(ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
UL AWM 2552, 30V, 60°C, VW-1, #18AWG |
* Using standard testing
method of Mogami Wire & Cable Corp.
| Option: |
FERRITE CORE
is available for Part No. W3080 and No. W3135 to eliminate EMI noise.
FITTING TUBING for ITT CANNON XLR connector is available for Part No.
W3080 and No. W3135 cable. |
Multicore 110W AES/EBU
Digital Audio Snake Cables
Back To Top
Like
the world standard MOGAMI multicore microphone "Snake" cable, very
flexible and compact design makes these multicore 110W AES/EBU DIGITAL
AUDIO cables easy for wiring, installation and handling.
- Because of employed cellular PP (polypropylene)
insulation material, regardless of its compact overall diameter, larger
conductor size is used, which naturally results in lower attenuation.
- Besides, there are the following outstanding
features similar to the standard analog multipair cables:
- Easy cable core identification system, such
as numbered cable core
- Easy wiring assisted by the same conductor
size drain wire
- Flexible and good low temperature
characteristic
W3160
| freq kHz |
abs(z)ohm |
arg(z)rad |
atten npr/m |
phase rad/m |
| 10 |
253.053778 |
-0.666284 |
0.000485 |
0.000617 |
| 20 |
186.122587 |
-0.559186 |
0.000611 |
0.000978 |
| 50 |
140.097832 |
-0.348423 |
0.00074 |
0.002038 |
| 100 |
127.900865 |
-0.206205 |
0.000811 |
0.003876 |
| 200 |
123.592395 |
-0.124331 |
0.000951 |
0.007596 |
| 500 |
120.029543 |
-0.080112 |
0.001498 |
0.018508 |
| 1000 |
117.020927 |
-0.0671 |
0.00236 |
0.036164 |
| 2000 |
114.290764 |
-0.0558 |
0.003866 |
0.070617 |
| 5000 |
111.573232 |
-0.04365 |
0.007263 |
0.173456 |
| 10000 |
110.521001 |
-0.0358 |
0.012238 |
0.351575 |
|
Part No.
|
Nos. of Cores.
|
O.D. (Approx. mm)
|
Jacket Thickness (Approx.
mm)
|
Weight (Kg/100m)(Kg/328Ft)
|
Maximum Length available
|
|
W3160
|
2-CR
|
9.0 (0.354")
|
1.0 (0.039")
|
8
|
305m (1,000Ft)
|
|
W3161
|
4-CR
|
10.5 (0.413")
|
1.2 (0.047")
|
14
|
|
W3162
|
8-CR
|
13.8 (0.543")
|
1.4 (0.055")
|
23
|
|
W3163
|
12-CR
|
17.0 (0.669")
|
1.6 (0.063")
|
30
|
CABLE CORE SPECS
| Configuration |
 |
| Conductor |
7/0.20A (0.22mm²)
#24AWG (7×#32AWG) |
| Insulation |
1.35ØCPP (Cellular
polypropylene) (0.053") |
| Drain
Wire |
7/0.20A (Exactly same as
conductor) |
| Shield |
Approx. 79/0.10A
Served (Spiral) Shield |
| Jacket
(covering) |
3.2Ø Flexible PVC
(0.126"Ø) |
| Identification |
Similar to analog snake
cable |
ELECTRICAL &
MECHANICAL CHARACTERISTICS
| DC Resistance at 20°C |
Inner
Pair Cond. |
0.081W/m(0.0247W/Ft) |
| Shield |
0.024W/m(0.0073W/Ft) |
Capacitance at 1kHz, 20°C
(effective capacitance value between inner twin) |
46pF/m(14pF/Ft) |
| Inductance |
0.8µH/m
(0.24µH/Ft) |
| Characteristic Imperdance |
110W±10% |
| Attenuation (6MHz) |
0.065dB/m (0.020db/Ft) |
| Phase Constant (6MHz) |
0.17rad/m |
| Electrostatic Noise* |
5.0mV Max. |
| Electromagnetic Noise at 10kHz* |
2.0mV Max. |
| Microphonics* |
60mV |
| Voltage Breakdown |
Must withstand at DC
500V/15sec |
| Insulation Resistance at DC 125V, 20°C |
10000 MW × m Min. |
| Tensile Strength of one Core |
303N |
| Emigration |
Non-Emigrant to ABS resin |
| Applicable Temperature |
-20°C‾
+70°C(-4°F‾ +158°F) |
| Standard |
AES3-100X(ANSI S.4.40-199X)
EBU Rech. 3250-E
CEI/IEC 958/CCIR Rec. 647
UL13 CL2X 60°C / UL20002 AWM 30V 60°C VW-1 |
* Using standard testing
method of Mogami Wire & Cable Corp.
|
![[Storefront]](http://a2dsolutions.com/gfx/B-store.gif)
![[A2D Solutions]](http://a2dsolutions.com/gfx/slogo.jpg)
